IWB-1   Large in-wall box & IWB-2 Small In-wall box

IWB-1 & IWB-2
  • Pre-construction or retrofit installation
  • Accommodates up to 3/4” thick wall material
  • Heavy duty “Dog Ears” install from the inside for easy installation…and they don’t fall into the wall.
  • Removable trim ring.
  • Knockouts to accommodate direct mounting of wall plates to the outer edge.
  • Knockouts for direct wire entry
  • Knockouts for both metal and plastic high-volt boxes.
  • Welded steel construction with heavy duty powder coated finish
  • Solid rear panel for direct mounting of components
  • Easy retrofit installation into any 2×4 wall.  Fitting into 16”on-center (IWB-1) 12″ on-center (IWB-2) or larger stud bays, the boxes are as simple as mounting an in-wall speaker.
  • Don’t worry about existing wires in the wall.  After mounting you will have over 1/2” of clearance behind the enclosure for existing wires. or running new wires.
  • Connect and test your system, PRIOR to hanging the display.  Save hours of labor making sure everything is correct the first time.
  • Patents Pending
  • Construction: 1.1mm steel, powder coated
  • 1.5mm thick outer flange
  • Butt welded and smoothed joints
IWB-1
  • Cut-Out Dimensions: 10.375” x 14.375”
  • Overall Dimensions: 15.76” x 11.76” x 3.51”
  • Hole Spacing: 0.50” (Breadboard models)
  • Hole Size 0.245” (Breadboard models)
  • 2.5Lbs. Product Weight
  • 3.0 Lbs. Shipping Weight
IWB-2
  • Cut-Out Dimensions: 10.375” x 8.39”
  • Overall Dimensions: 9.78” x 11.76” x 3.51”
  • Hole Spacing: 0.50” (Breadboard models)
  • Hole Size 0.245” (Breadboard models)
  • 2.5Lbs. Product Weight
  • 3.0 Lbs. Shipping Weight
What’s in the box?
  • IWB Enclosure
  • Dog Ears
  • 5mm Dog Ear Screws
  • Self tap screws for mounting plates
  • Trim ring screws
  • Self tap screws for rear panel
  • GRM-1 wire Grommet
  • Cut Out Template
IWB-1 Cut Sheet:
IWB-1 Product Sheet 2015

IWB-1 & IWB-2 Cut Sheet:

IWB-1_2 cut sheet 2015

 

 

IWB-1 Solid and Breadboard Versions

dxf6C4C.tmp

IWB-2 Solid and Breadboard Versions

dxfDD48.tmp

 

 

IWB-1 bw  (Large enclosure, Breadboard, White)

The best in-wall box…with the exception of our “X” series…

Our IWB “s” and “b” series of enclosures are very easy to install and incredibly flexible in design.  With the ability to used in Pre-Construction or retrofit installations, they will fit into any installation.

Simplify your installation and make them more profitable at the same time.

Available in Black or White, solid back or breadboard back.

 
IWB-2 sb  (Small Enclosure, Solid Back, Black)
REMOVABLE TRIM RING

Our enclosures feature a removable trim ring, so they can be mounted Pre-Construction or retrofit…no pre-construction kit needed.

Flexible power options

 

Our boxes have the ability to use either metal or plastic electrical back boxes.  Now you can use the power box that you like most.

Direct wall plate mounting

Our wall plate punch-outs are perfect for all of your A/V connections.

Directly mount wall plates to the side of the enclosure and keep your installation clutter free.

Fit over 3/4″ wallboard

 

Our enclosures feature the ability to fit over 3/4″ wallboard, great for jobs with 5/8″ wallboard and a heavy finish.

Our removable trim ring has the ability to adjust up and down, this is great for getting the perfect fit.

Heavy duty dog ears

 

Our Dog ears install from the inside and don’t fall into the wall cavity.  They are incredibly strong and can support the enclosure by themselves, or add additional support when stud mounted.

Direct wire openings

Multiple racetrack shaped punch-outs allow you to easily pull your wires into the enclosure.  Our grommet protects the wires and keeps them in place.

Breadboard Design

Our “bb” and “bw” series of enclosures feature our unique breadboard design, which gives you  unlimited mounting options.  Use our UMC clamps to easily attach your components, or simply use wire ties.  They are also great for extra ventalation.

Our “sb” and “sw” enclosures feature a solid back design for direct mounting of your components…we even supply self tapping screws.

IWB-1 breadboard