Power Over Ethernet
WHAT IS THE S-MOUNT?
It is a super slim magnet mount for your phone or tablet, which can easily be installed on any flat surface.
Once installed you can quickly attach and remove your device, then slip it into your favorite carrying case.
The mount is only 1/4" thick and does not require a special case, so the tablet looks like it is attached to the wall.
Designed to look like a wall plate, it blends with the homes decor.
Three different versions are available: The S-Mount (Unpowered), the S-Mount-HV (High volt 110/220), and S-Mount-POE (Power over ethernet)
How does it work?
The S-Mount-POE (Power Over Ethernet) gets its power from a remote location, such as the A/V racks or closet by way of a Cat5/6 cable. Because only low volt power is used to power the device through the cable, most homeowners can do the installation without a licence or permit.
A POE injector, such as the s-Mount-POE-I, supplies power to the cable to feed the S-Mount. The injector is plugged into a 120/240 outlet.
There is a micro USB located on the side of the S-Mount plate, this is where you will connect our adapter cable. The other end of the cable plugs into your device. At this point, you have run power from the remote location and are now charging your tablet.
Sounds complicated, but it is very easy.
There are 4 super strong Neodymium rare earth magnets that hide behind the rubber face, these are attracted to the metal plate that is on the rear of your device. The magnets will NOT harm your device in any way.
DOES YOUR COUNTER LOOK LIKE THIS?
Too many devices, not enough outlets. uncharged tablets, mixed brands and different chargers
…we have a solution, the S-Mount!
Available in three versions...S-Mount (Non Charging), S-Mount-POE (Power Over Ethernet), or S-Mount-P (120v/240v) High Powered.
THE POE RECEIVER
On the rear of the S-Mount-HV is our custom POE receiver. This little box, measuring only 1″ x 1″ x 2″, is capable of fast charging your tablet with 2.0A output capability.
We supply cables for Apple 8-Pin, Micro USB and Micro USB-C. One side of the cable plugs into the S-Mount-POE, the other side plugs into the tablet…it’s that easy.
Can I install it?
YES! The installation of this product is low volt and in most areas can be installed without a permit or licence.
You can view the installation instructions here: S-Mount-POE Manual
**NOT COMPATIBLE WITH THE 2018 and newer IPAD PRO**
WALL MOUNT AND CHARGE AT THE SAME TIME
With the S-Mount-POE and S-Mount-HV, you can store, charge, and use your tablet without taking up counter space.
Works with any flat backed tablet using Apple 8-Pin, Micro USB or Micro USB-C.
A removable thin metal plate is attached to the rear of the tablet, this is what allows it to stick to the S-mount.
The adapter is attached using 3M™ tape, and can be removed if necessary.
You can continue to use your current carrying case.
Everything that you need to add one POE touch panel location.
- S-Mount plate
- S-Mount Receiver
- S-Mount tablet adapter
- Instruction Manual
- Rubber Face
- S-Mount to Apple 8-pin
- S-Mount to Micro USB
- S-Mount to Micro USB-C
- Alcohol wipes
- Mounting screws
ROTATE IN ANY DIRECTION
Once installed the tablet can easily be rotated in any direction.
Assembled Here, and proud of it!
All of our S-mounts are assembled in Arizona by hand. We take pride in every product we send out, and it shows.
The finished installation
At only 1/4" thick, the S-mount keeps the tablet close to the wall, appearing to float on the surface.
Use the case you want
Unlike most tablet mounts on the market, the S-Mount does not require a special case for your tablet.